ONLINE SHOP
CONTACT
ABOUT US
PARTNERS
DOWNLOAD



 

Instruction
  SILK PLASTER is a reliable high quality wall finishing material that lasts for years. A wide variety of colors and textures makes it possible to create the most beautiful interior design, while sound and heat insulation properties add comfort to your home!
  Instruction:
Preparation of the surface:
1. The surface should be dry, smooth, clean, monochrome white, free from stains
and dust.
2. The prepared surface should be treated with a deep penetration primer.
3. After that, apply 2 layers of SILK PLASTER primer over the entire surface, aiming
for total coverage. Drying time between the layers application is 24 hours.
SILK PLASTER decorative plasters should be applied 24 hours after the application
of the second layer of SILK PLASTER primer.
Preparation of the material:
4. Pour clean water of room temperature (20-25 degrees Celsius) without sediment
and impurities into a plastic container. The amount of water for each type of
decorative plaster is indicated on the packaging.
5. Pour the content of the package into the water. If desired, add glitters and/or
decorative additives, evenly distributing them over the surface. NOTE: All types of
glitters and additives are purchased separately.
6. Mix the material by hand thoroughly to avoid glue clumps. To mix some materials
a drill with a mixer nozzle should be used - see the sign on the packaging.
* Partial mixing of one package is not allowed!
* If you need several packages of SILK PLASTER, mix them at once.
* One wall (surface) should be completely covered with the material from the same
mix. 7. Put the soaked material in a plastic bag and keep it for 12 hours.
Application:
8. Before application, mix the material thoroughly by hand. Some materials should
be mixed with a drill with a mixer nozzle.
9. Use a plastic trowel to apply small amounts of the mixed material from one
kneading evenly throughout the surface.
* After 1-2 hours smooth the surface with the trowel, wetting it with water.
* The material should be used within 48 hours after soaking.
* The temperature of air in the room should be not lower than 15 degrees Celsius;
the level of humidity should not exceed 70%.
10. To increase durability, as well as for a future possibility of wet cleaning, cover the
surface with SILK PLASTER varnish
  Composition: textile and cellulose fibers, decorative and
mineral additives, adhesive.
Expiration date: not limited, if the package is sealed.
Storage: keep in a dry place at min: 5°C max: 40°C, away
from direct sunlight.